RigWay™

Tutorial

How to use RigWay™

A short guide for RigWay™ Trucker Overlay, version 1.42. Last updated: November 20, 2026.

The same guide is built into the app. Open it from the How to use RigWay™ button at the bottom of Overlay settings (tap the box). The in-app guide works with no network connection.

What the overlay shows

RigWay™ puts a small floating box on top of Google Maps while you drive. A typical box looks like this:

Gypsum
Colorado                 MST
Eagle County
6,350 ft              mm. 359
↗[thermo] 40°F  [drop] 65%  [pressure] 29.88  [dew] 27°F
Love's/TA/Flying J · Exit 46 · 12 mi
Rest area · 17 mi
SCALE HOUSE · 12 mi
My Spot · Parking · 3 mi
  • City, state, county, and the time zone set on your phone.
  • Elevation, road grade on steep hills, and an estimated highway mile marker (mm.).
  • Weather, left to right: temperature, humidity, barometric pressure, dew point, and optional wind (off by default). See Weather line.
  • The next truck stop ahead, with the exit and distance when known.
  • The next rest area ahead (or welcome center, truck parking, or scenic overlook with truck access), with its type and the distance.
  • The next scale house ahead, with the distance only. See Scale house line.
  • Stops you have saved.

All place, highway, truck-stop, rest-area, and scale-house data is built into the app. There is no account, no tracking, and there are no ads.

Getting started

When you first open the app, you see Set up RigWay™. There are four steps, one after the other:

  1. Allow location
  2. Allow display over other apps
  3. Turn on Accessibility (needed to show the box)
  4. Allow background running

On Android’s own settings screens, a small guide card floats on top and shows the steps for that screen. With the accessibility service on, the box appears when Google Maps is open nearly full screen. It is shown only over Google Maps.

Scale house line

The scale house line sits under the rest area line, like SCALE HOUSE · 12 mi (kilometers with Metric units). It covers scale houses, weigh stations, ports of entry, and DOT inspection and check stations ahead on your interstate or US highway.

  • It shows only where a scale is and how far away it is.
  • RigWay™ never shows whether a scale is open or closed, and it never shows hours or live status. Always follow the roadside signs.
  • When a scale’s direction is known (from the list or from the road), scales for the other direction are skipped. When direction cannot be determined, a scale ahead geographically may still be shown.
  • When no scale is ahead, the line is hidden.
  • Tap the line for details: type, highway, direction, and state.
  • Turn it on or off in Choose overlay info > Scale house (on by default). Distances follow your miles or kilometers setting.
  • Scale locations come from OpenStreetMap and are stored on your phone. This line does not use the internet and needs no extra permission.

Weather line

The weather line sits right under the elevation line. From left to right:

  • Temperature (thermometer icon) is first. A small arrow in front of the thermometer shows the trend over about the last hour: up means warmer, down means cooler, and sideways means steady. With no arrow, there are not enough recent reports to tell.
  • Humidity (a drop with a % sign) is the relative humidity, in percent.
  • Barometric pressure (an icon of three flowing lines) shows just the number, with no unit. The icon itself is the trend over the last 3 hours: arrows on top point up when the pressure rose and down when it fell. Plain lines, with no arrows, mean it is steady or there are not enough reports to tell.
  • Dew point (a thermometer with drops) is next. When the air temperature drops close to it, expect fog, frost, or icy spots.
  • Wind (a small arrow) is last when switched on. It shows the wind speed and a small arrow that points the way the wind is blowing (toward). Units are mph in Imperial and km/h in Metric. Wind is off by default. When it is off, its place at the end of the line stays empty so the other four weather pieces do not move. Some stations omit wind; then you see --. Wind comes from the same NWS station report as the other weather values.

The values come from the US National Weather Service — the latest report from the nearest station, often an airport. Units follow the units setting (°F / inHg / mph, or °C / hPa / km/h). Weather values never break mid-number: 55°F, 40%, pressure, dew point, and 12 mph stay on one line next to their icons, in Auto or Fixed width.

Each weather piece is a switch in Choose overlay info. Wind is off by default. With all five off, RigWay™ sends no weather requests. Wind alone is enough to keep weather requests going.

Imperial and Metric units

One setting controls every unit in the box. Change it in Choose overlay info under Units, or on the main RigWay™ screen under Altitude units.

  • Imperial: feet, miles, °F, inches of mercury, and mph.
  • Metric: meters, kilometers, °C, hPa (the same as millibars), and km/h.

Distances on the truck-stop, rest-area, and scale-house lines follow this setting, and so does the weather line. The box changes right away.

Choose overlay info

Tap the box, then tap Choose overlay info (right above How to use RigWay™). At the top is Units. Below it, every piece of the box has a switch. Everything starts switched on except Wind, which starts off. Each tap is saved at once. The lines never change order; a switch only shows or hides.

  • Place: City / town, State, Time zone, County
  • Road: Elevation, Road grade, Mile marker
  • Weather (uses the internet): Temperature, Humidity, Barometric pressure, Dew point, Wind (off by default)
  • Stops: Next truck stop, Next rest area, Scale house, My stop (private line)

Overlay settings also has appearance options (Menu style, Overlay style, Color scheme), text size, font, thickness, colors, opacity, and width. The same look settings are on the main screen under Style.

Overlay width

In Overlay settings, Width sits below the font, color, and opacity settings. It says Automatic (pinch the box to fix it) or Fixed … dp (pinch the box to change). Pinch the box with two fingers to set a fixed width, or tap Auto width to go back to automatic.

In Auto or Fixed width, weather values never break mid-number. A temperature such as 55°F stays on one line next to the thermometer — it will not wrap as “5- / 5- / °F”.

Update check

At most once a day, while you use the app, RigWay™ checks a small file at https://rigway.net/rigway/version.json to see whether a newer version is available. This request sends no personal information, location, or device identifiers.

If an update exists, the app shows an Update available button that opens RigWay™’s Google Play page, and, if you allow notifications, one notification for that version.

What uses the internet

RigWay™ asks for the INTERNET permission for two uses only:

  • The weather line, which sends your approximate position (rounded to about 1 km, or 0.7 mile) to the US National Weather Service, only while the box is on screen and at least one weather switch is on.
  • The once-a-day update check described above, which sends nothing about you.

It does not use the internet for general browsing, maps, or anything else. Everything else about your location stays on your phone. If you switch all five weather pieces off, the only remaining network use is the daily update check.

An address you paste or share without coordinates may be looked up by your phone’s own map service. A message goes out only if you choose to send an email from your own email app.

Contact

Questions or problems: customersupport@2by9studio.com

The full in-app guide also covers adding and sharing stops, hiding the box over Maps sheets, troubleshooting, and data credits.